Відео

Is it ok to push the steering rack that far away from its mounting bolt holes as all other videos I have seen say only to move it about 1 inch towards the front of the car

What if my oil pressure gauge shows lowish, but whenever I accelerate it goes up to normal and stays until I show down? Is that normal?

How long do u run it with the atf??

For the love of god spray that thing!

My Tahoe was fine until I got a oil change. Now it's shaking really bad when I'm sitting at a red light. I went back to the mechanic shop and told them it's acting weird and shaking. They said its fine NO ITS NOT! It didn't do none of this until I got a oil change. Now I'm frustrated I work very far out and can't drive to work because of what's happening.

Mine is doing the same thing. Problem with finding repair shop.

Am I dropping a quart of oil to replace with ATF or just adding both fluids to the engine?

Has anyone ever experienced the oil pressure being high and when you step on it it drops? What does that mean? Is this mean anything to anyone trying to figure out if it’s the O-ring on the oil pick up tube for the sensor or the plug in the oil pan or if I need a oil pump or if the bearings are ate up help

I'm glad to see that you were able to fix the issue on your washer all the way back then! I'm sure it stayed reliable for many more years afterwards... Our 2003 top loader still runs to this day, but it's age shows. It sprung a leak not too long ago and my father has been trying to fix it although he hasn't had the time to. Our GE 2003 Front Loader dryer broke down like 8 years ago so it's it's a miracle we still have the 2003 top loader with us. Unfortunately though I believe it's on it's way out as it seems to be starting to make a horrible racket and squeaking noises as it goes into the spin cycle. It sound like as if it may blow up anytime and I get worried. (Edit: I just realized it's not from General Electric: it's from *Frigidaire.)*

Funny how Jeremy Clarkson said "I don't understand this car (LFA)." cause of the price before he ever drove one. Then after he drove it he ultimately said it was the best car he had ever driven.

What wrong is the bearing that on the mower blade is probably broken

Thank you. Every search I did insisted on replacing wheels or belt. It's definitely the motor for me, as well.

how much cps can its macro get

10 comments gonna turn into 10000 real soon

All 4 batt went to sleep how can i wake them up.

This worked, saw the sludge come out of her. Back to normal PSI🎉

Nice video but you spent way to much time on your lug nuts.

What rear air suspension would you recommend for towing. Recently I been towing a couple vehicles and I notice that the rear squats a lot. Any suggestions for rear air bags that are more durable or even a delete kit

Thanks for the link to the part and the instructions. That part did the trick and my dishwasher is working again. Wife wanted a new dishwasher. So she's happy, yet disappointed.

We found another thing to stop those motors. ua-cam.com/video/Pxg5fA8-TGQ/v-deo.htmlsi=BGwbTpl-4Wlon31Z

How did you release the air pressure?

Hey I’m having similar problems on 09 suburban, I replaced sensor, did tune up, and new head gasket. I just haven’t tried this method or oil pump,mine have same lights on and does makes a tick noise, also sits around 15/20 psi steady. I want to try this method before trying oil pump or getting new motor where did u pour the atf and seafoam into so I can see if that fixes my problem and will it turn off service traction controls and stabilize links messages off … hope to get a reply soon plz help!!

I have the snapper 60v model mine does the same except no beeping sound but if I hold the lever down it’ll eventually turn on sometimes holding it for a min sometimes 10 mins 😅 it’s to the point I just set some vice grips on the lever and walk away do other yard work till I hear it running and come back to it

GE's are the biggest, worst piles of garbage ever made. If it's a GE, you're going to have problems with it like no other brand.

I have the same one too and I had ordered three extra batteries. Used it for about three years. It died like yours. I have no idea. No one online posted any solution. So I gave up and went back to gas mower.

My mower wont start. It beeps. What a piece of junk company. Green works or ryobi from now on.

How much sea foam do you add? Do you still add the 6 quarts and then sea foam?

Did it solve the problem or did you have to replace the sway bars as well?

I have a 2011 Chevy Tahoe Lt. I've changed the oil pressure sensor 3 times and filter screen. The check engine light still comes on after driving around 30-40 miles. It struggles with power going up hills on the freeway. Oil pressure doesn't go all the way to 0 and it never tells me the oil is low. A couple of mechanics told me my oil pump is fine so I don't know what to do. Should I try your method before dropping the oil pan to check the O ring❓

So I was driving my 250,000 mile Yukon daily. This just happened to me. I was freaking out cause I thought it was time for a new engine. I put a bottle of sea foam, 1 qt of tranny fluid in and let it run for 3 min or so. Changed the oil. Changed the oil pressure switch and cleaned the screen. Fired it up and it’s all good. Thank you. Thank you. Thank you.

I meant the levels in 2v2 wasn't the same now its balanced

Thank you so much for making this video! I replaced the same valve with the one you recommended and now we have a dishwasher again! You saved me a huge repair bill. Thank you!!

I took mine to a Snapper authorized repair center and they kept it 7 months. I finally asked them if they seriously could fix them and he said, no they never had. He said there are some repair materials from Snapper and there are really only a few issues (switch, wiring harness, motor, motherboard) but no one has real training and experience on them. He stated another customer had the exact model and Snapper had sent replacements batteries but that was pretty worthless. He finally junked it and bought something else. Snapper has a real problem here. I'm going to at least see if Snapper will email me the manual so I can take a crack it. The next nearest shop is 60 miles away and doubtful they know what they are doing either.

The levels wasn't the same

The air ride stuff is to expensive i bought the trq shocks and struts front and rear for the regular 4x4 armada le and new coil springs .. the site says wont convert my air ride and not compatible for some reason but i cant understand why ?? All the measurements and mount locations and attachment types are the exact same ... im waiting on the delivery to do the installation but im confident it should work .. and the cost of front /rear shocks and struts and new coil springs was 350 dollars far cheaper than air ride ...

Happened me twice. LONG story short, changed oil, it was fine. BOTH TIMES!😫🙂

I have a 2012 Nissan armada that I tried to replace the rear air struts with no success, the bottom bolt put me out of service for 2 days not good, I was wondering in the lower bolts are threaded to the frame? I would like to get a sawzall and cut them off?

How long did you leave the seafoam and transmission fluid in the engine? Did you change oil after?

I had a similar problem, and after opening the oil pump, I found that the spring was broken I replaced the springs with a new one, a little longer, and now the oil pressure is 60, and when the car is hot it reaches above 40.

Have similar problems. Here is what to look for not in any particular order. Bad sending unit, Bad oil seals, rear main seal, o ring on the oil pick up tube in pan cracked, oil pump worn, and Cheap restrictive oil filters. I do recommend the oil flush trick on older high mileage engines too. Good luck!

ive been here a lot(so fun!)😃

I have 2010 Silverado I just had my oil pressure read high(80) then it just dropped to zero

Damn anybody else see the guy across the street clean build ❤

Is the humming sound when I start the truck in the rear the air compressor? I want to know if my compressor works before replacing if not just replacing w. Regular shocks kit.

mine doesn't have the AUTORUN.exe file and idk what to do

Did you replace the filter under the oil pressure sending unit? They are known for clogging up and the oil can't pass through and needs to be replaced when you replace the sending unit.

I just had one of these come to my shop yesterday with the same problem for the first time. Kinda surprised i haven't seen it sooner, being a snapper dealer. I'll figure it out and get back to ya.

Did your suv also smoke from the tailpipe when you started it?

Good evening I ran across this video because I’m pretty much having the same problem. I have a 2009 GMC Yukon Denali 6.2 L engine. I’m having the same issues everybody else is having where my oil pressure sensor keeps coming on. I’ve changed it three times already the first one. I thought I had brought it from Amazon and the mechanic fixed it but he had broke the screen that was down in it so I had to go back and I ordered it from AutoZone, well I just recently got it fixed not too long ago and the oil sensor is still on. So just today I went to the dealer and brought the oil pressure switch to get it replaced and it’s still on . I sent so much money trying to figure out what the problem is and I can’t seem to figure it out I need help yeah what should I do because I don’t know what to do. Please help.

Had this issue on my 07 Tahoe. Replaced oil pressure sensor, that did not solve the problem. Ended up dropping oil pan and replacing oil pick up tube o-ring. Problem solved. While you have the pan off make sure and replace oil pressure relief valve.